mm-temp-basals.py

Help

usage: mm-temp-basals.py [-h] [–serial SERIAL] [–port PORT] [–no-op] [–skip-prelude] [–no-rf-prelude] [–skip-postlude] [-v] [–rf-minutes SESSION_LIFE] [–auto-init] [–init] [–duration DURATION] [–rate RATE] [–out OUT] {query,set,percent}

mm-temp-basals.py - query or set temp basals

positional arguments: {query,set,percent} Set or query pump status [default: query)]

optional arguments: -h, –help show this help message and exit –serial SERIAL serial number of pump [default: ] –port PORT Path to device [default: scan] –no-op Dry run, don’t do main function –skip-prelude Don’t do the normal prelude. –no-rf-prelude Do the prelude, but don’t query the pump. –skip-postlude Don’t do the normal postlude. -v, –verbose Verbosity –rf-minutes SESSION_LIFE How long RF sessions should last –auto-init Send power ctrl to initialize RF session. –init Send power ctrl to initialize RF session. –duration DURATION Duration of temp rate [default: 0)] –rate RATE Rate of temp basal [default: 0)] –out OUT Put basal in this file

Set or query temp basals.